Alloy 718 Daim Ntawv
ALLOY 718 yog nag ntsis muaj zog {}}} kub {}} kub allys nyob rau hauv thawj qhov chaw, thiab muaj kev qaug zog zoo, hluav taws xob, hluav taws xob zoo, Oxidation, corrosion tsis kam, raws li zoo machining kev ua haujlwm ruaj khov, muaj ntau lub zog ua haujlwm, ntsuas kub nyob rau hauv cov saum toj no tau nce ntau cov ntawv thov.
718 Nickel Alloys Phaj Tshuaj Raug Tshuaj
| Min% | Max% | |
|---|---|---|
| NI (+ CO) | 50.00 | 55.00 |
| Cr | 17.00 | 21.00 |
| Zaum fe | Bal. | |
| Nb (+ ta) | 4.75 | 5.50 |
| Mo | 2.80 | 3.30 |
| Ti | 0.65 | 1.15 |
| Al | 0.20 | 0.80 |
| Co las | 1.00 | |
| C | 0.08 | |
| Mn | 0.35 | |
| Si | 0.35 | |
| P | 0.015 | |
| S | 0.015 | |
| B | 0.006 | |
| CU | 0.30 |
Alloy 718 Nickel Alloy Khoom Siv Khoom Siv Neeg Kho Tshuab
| Khoom | Lub zog tensile | Tos lub zog 0,2 | Elongation | Hardness HB30 |
|---|---|---|---|---|
| N07718 | 965 n / mm² | 550 n / mm² | 30% | 363Hb |
Cov khoom ntawm Alloy 718 Nickel Alloy Steel
1. Kev ua tau yooj yim;
2. Ntawm 700℃nrog lub zog siab tensile lub zog, qaug zog dag zog, lub zog nqus thiab ua kom muaj zog;
3. Cov oxidation tsis kam ntawm 1000 degree;
4. Cov khoom siv hluav taws xob ruaj khov ntawm cov kub tsawg;
5. Kev ua haujlwm zoo.
Alloy 718 Nickel Alloys Daim Ntawv Qhia Txog
Lwm tus yam ntxwv ntawm cov koom haum no yog tias lub koom haum ntawm Alloy theem nag lossis cov txheej txheem sib txawv, tuaj yeem ua kom tau cov kev cai sib txawv thiab kev ua haujlwm ntawm cov kev xav tau ntawm ntau qhov chaw.
Gnee Pawg Pab Pawg Duab
Gnee Pab Pawg Neeg Siv Khoom Mus Xyuas
Gnee pawg koom nrog hauv cov khoom lag luam hlau
Peb muaj kev tshaj lij kev pab cuam online cov neeg ua haujlwm. Yog tias koj muaj lus nug txog Alloy 718 ntawv, thov xa rau peb thiab peb yuav teb rau koj hauv ib hnub ua haujlwm.
Cim npe nrov: Alloy 718 Ntawv, Tuam Tshoj Alloy 718 Ntawv Manufacturers, Chaw muag khoom, Hoobkas
